Protomaker Black Sprint Original 3D Printer
Powder Coated Mild Steel Structure With Acrylic Build Platform
- Product Type : All In One Printers
- Cartridge Type : Original
- Utility : 3d Printing
- Printing Output : Colored
- Print Technology : Fused deposition modeling (FDM)
- Size : Large
- Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
- SUPC: SDL051787633
Kapton Tape PLA tested and FAILS pr 1 Fitting Kapton Tape
This is Part 1 of my testing Kapton Tape with PLA filament printing, fitting Kapton Tape and it FAILS with PLA printed parts lifting from the build plate.
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
Kapton Tape PLA tested and FAILS pr 2 Kapton Tape Nothing Else
This is Part 2 of my testing Kapton Tape with PLA filament printing. Printing directly on to Kapton Tape without any other treatments and it FAILS with PLA printed parts lifting from the build plate.
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
Kapton Tape PLA tested and FAILS pr 3 Kapton Tape PVA Glue
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
LikeLike
Kapton Tape PLA tested and FAILS pr 4 Kapton Tape Hair Spray
This is Part 4 of my testing Kapton Tape with PLA filament printing, Hair Spray and it FAILS with PLA printed parts lifting from the build plate.
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
Kapton Tape PLA tested and FAILS pr 5 Kapton Tape Glue Stick
This is Part 5 of my testing Kapton Tape with PLA filament printing, using Glue Stick on Kapton Tape and it FAILS with PLA printed parts lifting from the build plate.
Notes: I tried the same print with the heated bed temperature set to 70° C and then set to 50° C. At 50° C it did stay on the build plate, (shown at the end of this video), and it finish the print without lifting off the print bed, (this indicates a lower heated bed temperature is more beneficial), but I feed this is too unreliable to use this method all the time.
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
Blue Painters Tape and PLA works
In this video for this print the heated bed is not turned on, so it is just ambient temperature, about 18° C to 22° C
Printing PLA onto Blue Painters Tape.
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
Blue Painters Tape, PLA Medium sized print, distorted!!!
PVA printing on to Blue Painters tape and heat bed turned off.
The printed PLA Medium sized print ended up distorted!!!
Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
PLA Blue Painters Tape 3D print warm bed test
Setting the Heat bed to 35° C I think helps reduce any warping on this PLA 100% infill printed onto Blue Painters Tape
Protomaker 3D Printer Was advertised for spares or repairs.
These video Protomaker Black Sprint Original 3D Printer some repair damage
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget
Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633
Tweets about 3D Printers: tips, hardware software, filament ,etc…
https://twitter.com/myvideostowatch
.
LikeLike
New Feeder a lot better 3D Printer Belt Drive
The eBay seller who made the feeder used to make this 3D print was very helpful and went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
This feeding system used to make this 3D print:-
MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
In this 3D Print I have modified, quite a bit:-
MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
and
LUCAS extruder version 2
http://www.thingiverse.com/thing:428312
Dragon Symbol
https://www.myminifactory.com/object/dragon-4543
Cura to slice into G-code that is placed onto a SD Card which is put in a LCD 12864 Display controller.
PLA 1.70mm* Blue, E3D v6 Nozzle 0.4mm
190° C Hotend. Heat Bed 30° C
Infill set to zero. Retraction set to 2mm at 150mm/s
and surface Blue Painters Tape.
* PLA Blue sold as 1.75mm but measured at 1.70mm
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget.
Protomaker Black Sprint Original 3D Printers advertised for spares or repairs.
Powder Coated Mild Steel Structure With Acrylic Build Platform
Product Type : All In One Printers
Cartridge Type : Original
Utility : 3d Printing
Printing Output : Colored
Print Technology : Fused deposition modelling (FDM)
Size : Large
Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
SUPC: SDL051787633
LikeLike
Save money time and filament 3D Printing
Near enough a Double saving of money, time and plastic
In Cura I will also use a 3D Print zero infill durring this initial testing.
This will also save money, time and plastic to see how well the
parts actually will fit together.
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget.
Protomaker Black Sprint Original 3D Printers advertised for spares or repairs.
Powder Coated Mild Steel Structure With Acrylic Build Platform
Product Type : All In One Printers
Cartridge Type : Original
Utility : 3d Printing
Printing Output : Colored
Print Technology : Fused deposition modelling (FDM)
Size : Large
Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
SUPC: SDL051787633
LikeLike
BLTouch Classic Auto-Leveling Sensor Part 1
Unboxing and very basic test, fails at first but updating Marlin sorts out the issues.
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
The fails where a Marlin issue I was using Release Candidate — Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
.
LikeLike
BLTouch Classic Auto-Leveling Sensor Part 2
Fitting and actual test print 100mm cube.
http://dai.ly/x49uqm1
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
The fails where a Marlin issue I was using Release Candidate — Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
.
LikeLike
BLTouch Classic Auto-Leveling Sensor Probe. Real life print
An actual model print
I get some shifting and strings, not due to the which is fine.
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
The fails where a Marlin issue I was using Release Candidate — Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
.
LikeLike
Mobile phone tripod mount Update 1
Using BLTouch Classic Auto Leveling Probe
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
The fails where a Marlin issue I was using Release Candidate — Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
.
LikeLike
Mobile phone tripod mount Update 2
My Mobliephone is Moto G (3rd Generation)
Using BLTouch Classic Auto Leveling Probe
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
I had a Marlin issue I was using Release Candidate —
Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
.
LikeLike
Mobile phone tripod mount. Final version
My Mobliephone is Moto G (3rd Generation)
Thingiverse File download:=
http://www.thingiverse.com/thing:1561465
Some improvement to this design of this Mobile phone Tripod Mount.
I am using Cura to see if Blobs and Zits are reduced.
https://www.simplify3d.com/support/print-quality-troubleshooting/#blobs-and-zits
Using BLTouch Classic Auto Leveling Probe
I am using RAMPS 1.4 with an LCD12864 graphics display controller with SD card
Protomaker Black Sprint Original 3D Printer
BLTouch Probe used for Auto Home and bed leveling.
Antclabs : BLTouch Probe : They have gone the extra mile to help me)
http://www.antclabs.com
Indiegogo campaign
https://www.indiegogo.com/projects/bltouch-auto-bed-leveling-sensor-for-3d-printers/x/4088298#/
Google Plus
https://plus.google.com/communities/109126963511513081214
I had a Marlin issue I was using Release Candidate —
Marlin 1.1.0-RC3 – 01 December 2015 which failed but the update to Marlin-1.1.0-RC6 : May 2016 has fixed the issue
Marlin-1.1.0-RC6 : May 2016
Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu
https://github.com/MarlinFirmware/Marlin
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and also went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
LikeLike
RAMPS 1.4 etc in a shoebox from 24 Volts
Power supply:-
https://hackaday.io/project/8680-power-supply-plan-24-volts-300watt-heatpad
It may take some time to get this 3D printer working to a level where it is usable due to lack of budget.
Protomaker Black Sprint Original 3D Printers advertised for spares or repairs.
Powder Coated Mild Steel Structure With Acrylic Build Platform
Product Type : All In One Printers
Cartridge Type : Original
Utility : 3d Printing
Printing Output : Colored
Print Technology : Fused deposition modelling (FDM)
Size : Large
Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
SUPC: SDL051787633
.
LikeLike
Quick Release Belt Drive Feeding. The “Pins”
The “Pins”
One Pin is used to hold the skateboard bearing and the other Pin which has a hole in for a 4mm bolt is to pivot that bolt for quick release of the filament.
Other parts for this “Quick Release Belt Drive Feeding” to follow.
I am using Cura 15.04.2 to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
BLTouch Probe used for Auto Home and bed leveling. Very helpful.
Antclabs
http://www.antclabs.com
Protomaker Black Sprint Original 3D Printer
Cura* to slice into G-code that is placed onto a SD Card which is put in a LCD 12864 Display controller.
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C Hotend all layers.
Heat Bed 70° C
Infill set to 80%. Layers 0.06 {fine}
No supports or raft.
Retraction set to 0.7mm at 40mm/s
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
BLTouch Classic Auto Leveling Probe Antclab website
http://www.antclabs.com
* PLA measured at 1.70mm
This Quick Release Belt Drive Feeding is based on:-
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
.
LikeLike
Quick Release Belt Drive Feeding
The “Push Plate” used to push the filament against the hob bolt
Other parts for this “Quick Release Belt Drive Feeding” to follow
I am using Cura 15.04.2 to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
BLTouch Probe used for Auto Home and bed leveling.
Antclabs
http://www.antclabs.com
Protomaker Black Sprint Original 3D Printer
Cura* to slice into G-code that is placed onto a SD Card which is put in a LCD 12864 Display controller.
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C Hotend all layers.
Heat Bed 70° C
Infill set to 80%. Layers 0.06 {fine}
No supports or raft.
Retraction set to 0.7mm at 40mm/s
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
BLTouch Classic Auto Leveling Probe Antclab website, very helpful.
http://www.antclabs.com
* PLA measured at 1.70mm
This Quick Release Belt Drive Feeding is based on:-
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
LikeLike
Auto level Probe but not leveling
Auto Leveling probes the print bed, (G29 after G28 Home), but the Z Axis does not level/tram, (move up or down as the print bed moves in the X or Y plane), during the print to allow for any out of level print bed.
This simple fix worked for me 🙂
LikeLike
Quick Release Belt Drive Feeding. The “Main Belt Drive” Some Zits
Other parts for this “Quick Release Belt Drive Feeding” to follow
I am using Slic3r to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
BLTouch Probe used for Auto Home and bed leveling. Very helpful.
Antclabs
http://www.antclabs.com
Protomaker Black Sprint Original 3D Printer
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C First Layer and 180° C Other layers.
Heat Bed 70° C, yes for PLA!!!
Infill set to 80%. Layers 0.06 {fine}
No supports or raft.
Retraction set to 0.7mm at 40mm/s
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
BLTouch Classic Auto Leveling Probe Antclab website went that extra mile to help me
http://www.antclabs.com
* PLA measured at 1.70mm
This Quick Release Belt Drive Feeding is based on:-
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and also went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
.
LikeLike
3D Printer Solid Polymer LM8UU Bearing FAIL
3D Printer Solid Polymer LM8UU Bearing 8mm shaft – Igus Drylin RJ4JP-01-08
Not recommended
Wobbles
.
LikeLike
24 Volt to 12 Volt Buck Convertor Heat
24 Volt to 12 Volt Buck Convertor Heat reducing
24 Volt to 12 Volt Buck Convertor. Trying to cut down the Heat in this unit
I use a 24 Volt PSU to power a 24 Volt, 300 Watt Heat Pad via a Solid State Relay that is controlled by the RAMPS 1.4. From the same 24 Volt power supply I use a 24 Volt to 12 Volt
Buck Convertor to power : the RAMPS 1.4, LED lighting as well as some fans.
The 24 Volt to 12 Volt Buck Convertor works well but gets hot in use.
This video shows the adding of a heat sink and fan to try to keep it cooler when in use.
Protomaker Black Sprint Original 3D Printer
eBay New 24V to 12V DC-DC 30A Car Power Supply Inverter Converter Conversion Device
This 24 Volt to 12 Volt
LikeLike
The “Main Belt Drive” Cura. Shifted layer at about 50%
http://dai.ly/x4czt56
Quick Release Belt Drive Feeding.
I am using Cura to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
Other parts for this “Quick Release Belt Drive Feeding” to follow
I am using Cura to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
BLTouch Probe used for Auto Home and bed leveling. Very helpful.
Antclabs
http://www.antclabs.com
Protomaker Black Sprint Original 3D Printer
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C All Layers
Heat Bed 0° C, for PLA!!!
Infill set to 80%.
Retractions as shown in the Cura settings displayed this video.
Supports used because of overhangs, which possibly could be designed out of this part.
No raft.
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
BLTouch Classic Auto Leveling Probe Antclab website went that extra mile to help me
http://www.antclabs.com
* PLA measured at 1.70mm
This Quick Release Belt Drive Feeding is based on:-
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and also went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
LikeLike
Main Belt Drive Cura. Success
Changed both Marlin, Firmware settings to print slower : Travel, Acceleration, Jerk speeds and Cura was also asked to print slower with the G-Gode slice.
Quick Release Belt Drive Feeding.
I am using Cura to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
Other parts for this “Quick Release Belt Drive Feeding” to follow
I am using Cura to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
BLTouch Probe used for Auto Home and bed leveling. Very helpful.
Antclabs
http://www.antclabs.com
Protomaker Black Sprint Original 3D Printer
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C All Layers
Heat Bed 0° C
Infill set to 80%.
Retractions as shown in the Cura settings displayed this video.
Supports used because of overhangs, which possibly could be designed out of this part.
No raft.
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
BLTouch Classic Auto Leveling Probe Antclab website went that extra mile to help me
http://www.antclabs.com
* PLA measured at 1.70mm
This Quick Release Belt Drive Feeding is based on:-
This is a MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this print was very helpful and also went that extra mile to help me
http://www.ebay.co.uk/usr/pilvytis
LikeLike
“Main Body” Quick Release Belt Drive Feeding. Cura.
Success, small warping and some ringing, I think they call it
Changed both Marlin, Firmware settings to print slower :
Travel, Acceleration, Jerk speeds and Cura was also asked to print slower with the G-Gode slice.
I am using Cura to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin
Protomaker Black Sprint Original 3D Printer
This feeder is strongly based on :-
Belt Feed MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this 3D print was very helpful and went that extra mile to help me
eBay seller : Pilvytis http://www.ebay.co.uk/usr/pilvytis
The Dragon Symbol is from:-
http://www.myminifactory.com/object/dragon-4543
PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm
190° C All Layers
Heat Bed 0° C, for Black PLA (1.75mm), measured at 1.70mm
Infill set to 80%.
Retractions in Cura set at 4.5mm at 40mm/s, this a high setting for the E3D v6 Hot end I use. Retractions of 5mm or more are troublesome as they pull hot filament up into the cold areas of the hotend where they can freeze, adhere and jam.
Supports used because of overhangs
No raft.
Surface Blue Painters Tape cleaned with Isopropyl alcohol.
Some ringing, I think they call it
Some small warping
Cura 15.04.5 used to slice
BLTouch Classic Auto Leveling Probe Antclab website
Also very helpful and went that extra mile
http://www.antclabs.com
Heat Pad 300 Watts 24 Volts Custom size 275mm x 225mm heat pad.
KEENOVO Custom Designed and Manufactured Silicone Heated
Went that extra mile to help me pick the correct heat pad
eBay seller: Keenovo http://www.ebay.co.uk/usr/keenovo
Optical smooth rods, in my case 8mm diameter
OD 8mm x 400mm Linear Optical Axis Steel Bearing Cylinder Rail for Drive Shaft
eBay Seller : heavend http://www.ebay.co.uk/usr/heavends
Noise during this print:-
AMD Heat sink with 80mm fan to cool down the buck convertor of 24 Volts PSU supply to 12 Volts for the RAMPS 1.4, LED ‘s and fans. This is too loud. I plan to change the AMD CPU heat sink fan supplied with a Gelid Solutions Silent Quiet Case Fan this should be much quieter. I may get a separate 12 Volt PSU instead
LikeLike
Quick Release Belt Drive Feeding. Putting parts together need tweaks.
Trying to build a Belt Drive feeder system putting all the
parts together I find that it works, (simulated test only).
It could still benefit from some tweaks and improvements..
Protomaker Black Sprint Original 3D Printer
This feeder is strongly based on :-
Belt Feed MXL Belt Bowden Extruder 1.75mm
http://www.thingiverse.com/thing:581170
The eBay seller who made the feeder used to make this 3D print
was very helpful and went that extra mile to help me
eBay seller : Pilvytis
http://www.ebay.co.uk/usr/pilvytis
The Dragon Symbol is from:-
http://www.myminifactory.com/object/dragon-4543
LikeLike
Silent 8 Fan quieter Buck Convertor fan for my 3D printer
When trying to cut down the heat caused by the 24 Volt to 12 Volt
Buck Convertor I used an AMD CPU Heatsink and fan. This reduces
heat but results in a much louder system so I exchange this noisy
AMD CPU fan for a Silent 8 Fan, (80mm).
I use a 24 Volt PSU to power a 24 Volt, 300 Watt Heat Pad
via a Solid State Relay that is controlled by the RAMPS 1.4.
From the same 24 Volt power supply I use a 24 Volt to 12 Volt
Buck Convertor to power : the RAMPS 1.4,
LED lighting as well as some fans.
The 24 Volt to 12 Volt Buck Convertor works well but gets hot in use.
Protomaker Black Sprint Original 3D Printer
LikeLike
24 Volt to 12 Volt Automotive buck convertor inside
I have now replaced this, it gets too hot form my liking with a 12 Volt PSU
LikeLike
Pause Testing. I wanted to test the “Pause” functions on my 3D Printer.
I wanted to test the “Pause” functions on my 3D Printer.
Pause Testing. I wanted to test the “Pause” functions on my 3D Printer.
So I made this (light weight in plastic use and time), simple “stl” file.
All it is is a tube, 25mm height, with some small parts at 5mm heights stinking out to indicate where Pause is selected.
Then using Cura I asked for the “Pause at height” plugin to pause at a Z height, (and also move the nozzle for easier access/filament changing etc), in my case 5mm and started to print.
This worked very well as I expected.
Note: the headbed and the nozzle temperatures stay on while Paused.
After Pause.
Clicking the knob on the LCD12864 Full Graphic Smart Controller moved the nozzle back to where the Pause started and continued the print without any issues.
Then I tried using the LCD12864 Full Graphic Smart Controller Pause option.
This worked BUT:-
a) The nozzle stayed where it was Paused at. This caused a blob of plastic to be oozed onto the part at this position.
b) It takes a bit of time to select the Pause option on the LCD12864 Full Graphic Smart Controller and printing continues until the Pause is actually selected. This means that the Pause may be harder to control for the actual position of the height, etc..
After Pause.
Selecting Resume on the LCD12864 Full Graphic Smart Controller started and continued the print form the unmoved nozzle position.
Note: the headbed and the nozzle temperatures stay on while Paused.
STL file download and details Thingiverse.
Pause Testing.stl
http://www.thingiverse.com/thing:1639671
LikeLike
Hi followed this link https://www.dailymotion.com/video/x38kvj2 to watch your video…best one ive found!
Followed the link to the software but it doesnt work.
Do you have another link or could you email me the software.
Many thanks,
James
LikeLiked by 1 person
https://onedrive.live.com/?authkey=%21AI4acNc1gFRbk94&id=3DCDB9E6CE514531%21762&cid=3DCDB9E6CE514531 Copy full link download code
ONLY change the waste Pad settings other changers will impact the printer hardware and could stop the printer working
LikeLike